Structural Adhesive Joints in Engineering [electronic resource] / by R. D. Adams.

Erişim Adresi
Link
ISBN
9789400956162
Dil Kodu
İngilizce
Yer Numarası
DK/13294
Yazar
Adams, R. D.
Basım Bildirimi
1st ed. 1984.
Yayın Bilgisi
Dordrecht : Springer Netherlands : Imprint: Springer, 1984.
Fiziksel Niteleme
X, 309 p. online resource.
İçindekiler Notu
1. Introduction -- Joint Configurations: Lap-shear Joints, Butt Joints, Fillets. Metals and Other Constructional Materials. The Decision to Use Adhesive Bonding. The Balance of Advantages and Disadvantages -- 2. The Nature And Magnitude of Stresses In Adhesive Joints -- Introduction: Reality, Methods of Mathematical Analysis. The Single Lap Joint: Linear Elastic Analysis, Volkersen’s Analysis, The Analysis of Goland and Reissner, Effect of Bending in a Double-lap Joint, Volkersen’s Second Theory, Later Work. The Single-lap Joint — End Effects: Reduction of Stress Concentrations. The Single-lap Joint — Elasto-plastic Analysis. The Effect of Adherend Shape — Scarfed, Bevelled and Stepped Adherends. Composite Materials. Tubular Joints. Butt Joints. The Use of Joints in Design: Lap Joints, Tubular Joints, T-joints, Corner Joints, Butt Joints, Stiffeners, Doublers, Assembly -- 3. Standard Mechanical Test Procedures -- Destructive Testing: Tests with Thin Sheet Adherends, Tests for Properties of Adhesives. Nondestructive Testing: Nature of Defects, Tests Carried Out Before Bonding, Post-bonding and In-service Testing -- 4. The General Properties of Polymeric Adhesives -- Polymer Structures: Unsaturation. Mixed Adhesives. Properties and Temperature: The Glass Transition Temperature, Decomposition Temperature, Melting Temperature, The Deformation of Adhesive Polymers by Stress, Viscoelasticity, The Modulus of an Adhesive, Poisson’s Ratio, Strength Properties of Adhesive Polymers, Yielding Stresses of Polymers, Failure Modes After Yielding, Creep, Failure without Yielding — Brittle Fracture, Crazing, Coefficient of Thermal Expansion, Resistance to Deterioration -- 5. Factors Influencing The Choice of Adhesive -- Interaction with Substrate. Structural Adhesives for Metals:Check-list for Structural Metal Adhesives Used at Temperatures up to 70°C, The Advantage of Supported Filmic Adhesives (Tapes’), Unsupported Films, Liquids and Pastes, Influence of Metal of Adherend, High Temperature Metal-Metal Adhesion. Structural Adhesives for Wood: Check-list for the Use of Structural Wood Adhesives. Structural Adhesives for Mixed Constructions: Metal-Wood Structures, Metal-reinforced Plastics Structures. Choice of Adhesives for Semi-structural Use: Checklist for Adhesives for Semi-structural Use -- 6. Surface Preparation -- Metals. Wood. Concrete. Glass or Carbon-fibre Reinforced Plastics. Shot, Sand or Grit Blasting. Solvent Degreasing or Wiping. Chemical Etching: Aluminium, Ferrous Metals, Titanium, Other Metals. Priming Layers: Primers as Coupling Agents -- 7. Service Life -- The Creep of Adhesive Joints. Time-to-failure (Under Static Loading). Cycles-to-failure: Influence of Temperature, Influence of Test Frequency, Influence of Amplitude, Influence of Moisture. Effects of Temperature Change on Joint Strength. Service Life as Indicated by Climatic Exposure Trials -- 8. Applications -- Aircraft, Anchorages. Bridges. Carriages. Cars. Decking. Furniture. Glass Reinforced Plastics. Helicopters. Helicopter Blades. Hovercraft. Lamp Posts. Magnets. PABST. Rollers. Segmental Construction. Ski Constructions. Telephone Kiosks. Yachts -- References -- Appendix: Standard American and UK Specifications for -- Adhesion Tests -- Author Index.
Özet, vb.
The intention of this book is that it should contain everything an engineer needs to know to be able to design and produce adhesively bonded joints which are required to carry significant loads. The advan­ tages and disadvantages of bonding are given, together with a sufficient understanding of the necessary mechanics and chemistry to enable the designer to make a sound engineering judgement in any particular case. The stresses in joints are discussed extensively so that the engineer can get sufficient philosophy or feel for them, or can delve more deeply into the mathematics to obtain quantitative solutions even with elasto­ plastic behaviour. A critical description is given of standard methods of testing adhesives, both destructively and non-destructively. The essen­ tial chemistry of adhesives and the importance of surface preparation are described and guidance is given for adhesive selection by me ans of check lists. For many applications, there will not be a unique adhesive which alone is suitable, and factors such as cost, convenience, produc­ tion considerations or familiarity may be decisive. A list of applications is given as examples. The authors wish to increase the confidence of engineers using adhesive bonding in load-bearing applications by the information and experience presented. With increasing experience of adhesives en­ gineering, design will become more elegant as weH as more fitted to its products.
Konu
Social sciences.
Humanities.
Humanities and Social Sciences.
Kurum Adı
SpringerLink (Online service)
İşlemler